2014-05-19T16:39:20.000Z http://sot.lmsal.com Ted Tarbell LMSAL http://lmsal.com 3251 Hanover Rd, O/ADBS, B/252, Palo Alto, CA, 94304 +1-650-424-2400 tarbell@lmsal.com Hinode SOTSP Arikawa Arikawa Shine (RCO) 0 0 null IHOP 243 QS QS Quiet Sun 7 347 839 0 0 2014-05-17T17:05:00.000Z 2014-05-17T17:58:00.000Z 347 839 Effects of Quiet Sun Weak Fields on the Chromosphere and Transition Region HOP 243 Very Fast Map, 9"x82", 2-side CCD, Q75, repeats SOT should use a FOV slightly larger than that of IRIS in both dimensions, to allow for pointing inaccuracy, and cadence of 30-75 seconds, to follow the evolution of the weak fields. For the BFI and NFI, the FOV should be at least 25 x 80 arcsec. NFI: magnetograms with high SNR, using ROI # 2 to shift by 25 arcsec towards the lower part of the CCD to have best image quality. Two programs being tested are: FG 0x4c9 IRIS Shless Na IV 31x82", ROI 2, 32 s, Ca, CN: Na FOV = 31x82 arcsec, cadence = 32 sec, telemetry usage = 280 Mbits/hour FG 0xTBD 5250 Shless IQUV + 5172 Shless IV + CaII ROI 2: 5250 FOV = 25x82 arcsec, cadence = 72 sec, telemetry usage = 180 Mbits/hour BFI: images in Ca H and CN or G-band, shifted to match the NFI FOV SP: very fast maps, to obtain the required time resolution with enough slit positions to maximize the chance of overlap with the IRIS slit. Both sides of the CCD are used to increase SNR. Two programs have been tested so far: SP 0x15b Very Fast Map, 9"x82", 2-side CCD, Q65, repeats: cadence = 73 sec, telemetry usage = 500 Mbits/hour SP 0x15e Very Fast Map, 4.5"x82", 2-side CCD, Q75, repeats: cadence = 39 sec, telemetry usage = 640 Mbits/hour The program with wider FOV should be used if IRIS is not rolled; if IRIS rolls by at least 5 degrees, then the narrower, faster program may be used with equal probability of overlap.